早教吧作业答案频道 -->英语-->
英语翻译TiminggearsThedrivegearassemblyconsistsofcylindricalgearswithhelicallycutteeth.Theinjectionpumpandcamshaftaredrivenbythecrankshaftviaanintermediategear.Theengine’slubricatingoilpumpisalsodrivenbythecra
题目详情
英语翻译
Timing gears
The drive gear assembly consists of cylindrical gears with helically cut teeth.
The injection pump and camshaft are driven by the crankshaft via an intermediate gear.The engine’s lubricating oil pump is also driven by the crankshaft via an intermediate drive gear.
Apart from the camshaft,the camshaft gear also drives the sea-water pump drive gear (marine engines),as well as air compressor,if fitted (optional equipment) is also driven by the camshaft gear.
Crank mechanism
Crankshaft
The crankshaft is journaled in seven main bearings.The axial bearing consists of thrust washers located at the centre main bearing.The crankshaft is balanced both statically and dynamically.The front end of the crankshaft has a polygon profile and the rear end has a flange to which the flywheel is bolted.
The crankshaft is nitro-carbureted.Provided that the shaft does not need to be straightened before grinding,grinding to max.2nd undersize can be done without a renewed nitro-carburetion
Timing gears
The drive gear assembly consists of cylindrical gears with helically cut teeth.
The injection pump and camshaft are driven by the crankshaft via an intermediate gear.The engine’s lubricating oil pump is also driven by the crankshaft via an intermediate drive gear.
Apart from the camshaft,the camshaft gear also drives the sea-water pump drive gear (marine engines),as well as air compressor,if fitted (optional equipment) is also driven by the camshaft gear.
Crank mechanism
Crankshaft
The crankshaft is journaled in seven main bearings.The axial bearing consists of thrust washers located at the centre main bearing.The crankshaft is balanced both statically and dynamically.The front end of the crankshaft has a polygon profile and the rear end has a flange to which the flywheel is bolted.
The crankshaft is nitro-carbureted.Provided that the shaft does not need to be straightened before grinding,grinding to max.2nd undersize can be done without a renewed nitro-carburetion
▼优质解答
答案和解析
定时齿轮 这种总成由驱动齿轮与形的圆柱齿轮切齿. 注射泵和凸轮轴的驱使下,透过曲轴一个中间齿轮.发动机的润滑油泵曲轴驱动通过一种中间驱动齿轮. 除了凸轮轴,凸轮轴齿轮也开车的海水液压泵驱动齿轮(船用柴...
看了 英语翻译Timinggear...的网友还看了以下:
选出与所给单词括号部分的读音相同的一项.1:cr(y).A:tr(y);B:cit(y);C:(y 2020-05-13 …
Cr2O72-+I-+H+=H2O+I2+Cr3+在100mlC(H+)=1mol/L的溶液中有以 2020-06-04 …
A.蠕动湍急莴苣毛骨悚然B.嗥叫艾蒿(àih 2020-06-21 …
英语单词填空1.时间状语:d-r-n-2.场所:b-s-s-o-f-r--e-a-t-e-t3.教 2020-07-14 …
请给下面指标里出现(出现大胆博,加仓,红牛和牛起步)信号添加到做下面的公式里A:=(3*C+L+O 2020-07-22 …
请给下面指标里出现:信号做个选股公式(出现大胆博,加仓,红牛和牛起步分别做选股加上去除)A:=(3 2020-07-22 …
请教各位达人,麻烦把以下公式修改为通信达可以使用的。谢谢A=(3*C+L+O+H)/6;多方资金线 2020-07-23 …
推断题:现有如下反应(反应条件均不给),推断物质⑴A→B+C+D⑵C+E→C+F+D⑶D+G→H⑷ 2020-07-30 …
三元一次方程组a*x+b*y+c*z+d=0,e*x+f*y+g*z+h=0,i*x+j*y+k* 2020-08-03 …
英语:下1.将下联打乱的字母组成单词,并写出汉语意思1.a,e,h,g,c,n[]2.e,i,s,t 2020-12-10 …