英语翻译金属铸件图纸求解翻译金属铸件图纸上的怎么翻译2XVARIABLERADIUSBLENDR7.5±0.5INCORNERBLENDEDTOR3±0.5USECADMODELFORTOOLINGINTERNALDISCONTINUITYLEVEL2SEENOTE5.CASTPARTNUMBER,REVISIONNUMBERANDFO

Question

英语翻译
金属铸件图纸求解翻译
金属铸件图纸上的 怎么翻译
2X VARIABLE RADIUS BLEND R7.5±0.5 IN CORNER BLENDED TO R3±0.5
USE CAD MODEL FOR TOOLING
INTERNAL DISCONTINUITY LEVEL 2 SEE NOTE 5.
CAST PART NUMBER,REVISION NUMBER AND FOUNDRY ID.HEAT THIS LOCATION SEE NOTE 4.
PARTING LINE DRAFT FROM THIS LOCATION
unless otherwise noted:
1.All TOLERANCES ± 1,0 unless otherwise stated.
2.surface finish must conform to scrata level 1.surface shall be free of cracks,DIVOTS AND INCLUSIONS.
NO GRIND MARKS ALLOWED BELOW THE DIMENSIONED SURFACES.
3.ALL CORNERS/EDGES R 3± 0.3.
4.PART AND REV NUMBER LETTER AS SHOWN.LETTERING TO BE RAISED 1 ±0.3 WITH MINIMUM LETTER HEIGHT TO BE 4.
5 INTERNAL DISCONTINUITY EVALUATION PER ASTM E186 OR
EUROPEAN EQUIVALENT.SEVERITY LEVEL 3 UNLESS OTHERWISE SPECIFIED.
DRFTR:BKERNS PB JORDAN
LH FORK CARRIER
还有上面的LH FORK CARRIER RH FORK CARRIER

Answer 1

R7.5 2X变化,在墙角混合±0.5% R3±0.5使用CAD模型为工具内部不连续二级见注5).铸造零件号,修订号和铸造ID .这个地点见注4热量.从这个位置的分界线草案除非另有注明.1.所有的误差±1 0,除非另有说明.2.surface完成sc...