英语翻译酸锌&磷化自动线基本参数：1、主机：L29.2m（导轨长）×W6.9m（导轨中心距,未含整流器等辅助设施）×H7.1m.2、龙门式双钩行车：3台；水平运行速度：0-28m/min（变频调速）；升降运行

Question

英语翻译
酸锌&磷化自动线基本参数：
1、主机：L29.2m（导轨长）×W6.9m（导轨中心距,未含整流器等辅助设施）×H7.1m.
2、龙门式双钩行车：3台；水平运行速度：0-28m/min（变频调速）；升降运行速度：0-16m/min.
3、行车最大提升重量：750kg；最大提升高度：2800mm.
4、槽液加温采用蒸汽加热（预热以2小时计算,起始温度按15℃计算）：升温3032Kg/h,保温911Kg/h.
5、生产作业时供水量(换水频率0.25槽/小时)：自来水：9m³/h,纯水：2 m³/h.
6、废水排放量：酸碱系废水：9m³/h,含磷废水：2m³/h.
7、设备总动力：3Φ-50Hz-380V-390kw(包括整流器、过滤机等辅助设备,同时使用系数：0.7）.

Answer 1

Zinc & phosphate automatic line basic parameters:
1, host: L29.2m (rail length) × W6.9m (rail center distance, not containing rectifiers and other auxiliary facilities) × H7.1m.
2, gantry hook driving: 3set; level of speed :0-28m / min (frequency conversion); lifting speed :0-16m / min.
3.Maximum vehicle lifting capacity : 750kg; maximum lift height: 2800mm.
4.Bath heated by steam heating (a 2 hour warm-up, the initial calculation of the temperature at 15 ℃): heating 3032Kg / h, holding 911Kg / h.
5.Production operations water supply ability (water exchange rate of 0.25 slots / h): running Water: 9m ³ / h, h2o: 2 m³ / h.
6, wastewater emissions: acid-base line water: 9m ³ / h, phosphorus-containing wastewater: 2m ³ / h.
7, the device total power: 3Φ-50Hz-380V-390kw (including rectifiers, filters and other auxiliary equipment, using both factor: 0.7).