早教吧作业答案频道 -->英语-->
谁有关于介绍防晒霜的英语短文啊?5分钟以内的,讲讲SPF,UVB,UVA,PA,他们的作用啊,系数啊就OK了
题目详情
谁有关于介绍防晒霜的英语短文啊?5分钟以内的,讲讲SPF,UVB,UVA,PA,他们的作用啊,系数啊就OK了
▼优质解答
答案和解析
Sunscreen (also known as sunblock,suntan lotion) is a lotion,spray or other topical product that helps protect the skin from the sun's ultraviolet (UV) radiation,and which reduces sunburn and other skin damage,ultimately leading to a lower risk of skin cancer.However,suntan lotion is an incorrect term for sunscreen as it is something entirely different.Suntan lotion is used to moisturize and maximize UV exposure and tanning,rather than block it.These are commonly called indoor tanning lotions when designed for use with tanning beds or just suntan lotion if designed for outdoor use and may or may not have SPF protection in them.
The best sunscreens protect against both UVB (ultraviolet radiation with wavelength between 290 and 320 nanometres),which can cause sunburn,and UVA (between 320 and 400 nanometres),which damages the skin with more long-term effects,such as premature skin aging.Most sunscreens work by containing either an organic chemical compound that absorbs ultraviolet light (such as oxybenzone) or an opaque material that reflects light (such as titanium dioxide,zinc oxide),or a combination of both.Typically,absorptive materials are referred to as chemical blocks,whereas opaque materials are mineral or physical blocks.
Dosing for sunscreen can be calculated using the formula for body surface area and subsequently subtracting the area covered by clothing that provides effective UV protection.The dose used in FDA sunscreen testing is 2 mg/cm².[1] Provided one assumes an "average" adult build of height 5 ft 4 in (163 cm) and weight 150 lb (68 kg) with a 32 in (82 cm) waist,that adult wearing a bathing suit covering the groin area should apply 29 g (approximately 1 oz) evenly to the uncovered body area.Considering only the face,this translates to about 1/4 to 1/3 of a teaspoon for the average adult face.
Contrary to the common advice that sunscreen should be reapplied every 2鈥?hours,research has shown that the best protection is achieved by application 15鈥?0 minutes before exposure,followed by one reapplication 15鈥?0 minutes after the sun exposure begins.Further reapplication is only necessary after activities such as swimming,sweating,and rubbing.[2]
However,more recent research at the University of California indicates that sunscreen needs to be reapplied within 2 hours in order to remain effective.Not reapplying could even cause more cell damage than not using sunscreen at all,due to the release of extra free radicals from absorbed chemicals.[3]
Dosing for sunscreen can be calculated using the formula for body surface area and subsequently subtracting the area covered by clothing that provides effective UV protection.The dose used in FDA sunscreen testing is 2 mg/cm².[1] Provided one assumes an "average" adult build of height 5 ft 4 in (163 cm) and weight 150 lb (68 kg) with a 32 in (82 cm) waist,that adult wearing a bathing suit covering the groin area should apply 29 g (approximately 1 oz) evenly to the uncovered body area.Considering only the face,this translates to about 1/4 to 1/3 of a teaspoon for the average adult face.
Contrary to the common advice that sunscreen should be reapplied every 2鈥?hours,research has shown that the best protection is achieved by application 15鈥?0 minutes before exposure,followed by one reapplication 15鈥?0 minutes after the sun exposure begins.Further reapplication is only necessary after activities such as swimming,sweating,and rubbing.[2]
However,more recent research at the University of California indicates that sunscreen needs to be reapplied within 2 hours in order to remain effective.Not reapplying could even cause more cell damage than not using sunscreen at all,due to the release of extra free radicals from absorbed chemicals.[3]
Dosing for sunscreen can be calculated using the formula for body surface area and subsequently subtracting the area covered by clothing that provides effective UV protection.The dose used in FDA sunscreen testing is 2 mg/cm².[1] Provided one assumes an "average" adult build of height 5 ft 4 in (163 cm) and weight 150 lb (68 kg) with a 32 in (82 cm) waist,that adult wearing a bathing suit covering the groin area should apply 29 g (approximately 1 oz) evenly to the uncovered body area.Considering only the face,this translates to about 1/4 to 1/3 of a teaspoon for the average adult face.
Contrary to the common advice that sunscreen should be reapplied every 2鈥?hours,research has shown that the best protection is achieved by application 15鈥?0 minutes before exposure,followed by one reapplication 15鈥?0 minutes after the sun exposure begins.Further reapplication is only necessary after activities such as swimming,sweating,and rubbing.[2]
However,more recent research at the University of California indicates that sunscreen needs to be reapplied within 2 hours in order to remain effective.Not reapplying could even cause more cell damage than not using sunscreen at all,due to the release of extra free radicals from absorbed chemicals.[3]
The principal ingredients in sunscreens are usually aromatic molecules conjugated with carbonyl groups.This general structure allows the molecule to absorb high-energy ultraviolet rays and release the energy as lower-energy rays,thereby preventing the skin-damaging ultraviolet rays from reaching the skin.So,upon exposure to UV light,most of the ingredients (with the notable exception of avobenzone) do not undergo significant chemical change,allowing these ingredients to retain the UV-absorbing potency without significant photo-degradation.[1]
The best sunscreens protect against both UVB (ultraviolet radiation with wavelength between 290 and 320 nanometres),which can cause sunburn,and UVA (between 320 and 400 nanometres),which damages the skin with more long-term effects,such as premature skin aging.Most sunscreens work by containing either an organic chemical compound that absorbs ultraviolet light (such as oxybenzone) or an opaque material that reflects light (such as titanium dioxide,zinc oxide),or a combination of both.Typically,absorptive materials are referred to as chemical blocks,whereas opaque materials are mineral or physical blocks.
Dosing for sunscreen can be calculated using the formula for body surface area and subsequently subtracting the area covered by clothing that provides effective UV protection.The dose used in FDA sunscreen testing is 2 mg/cm².[1] Provided one assumes an "average" adult build of height 5 ft 4 in (163 cm) and weight 150 lb (68 kg) with a 32 in (82 cm) waist,that adult wearing a bathing suit covering the groin area should apply 29 g (approximately 1 oz) evenly to the uncovered body area.Considering only the face,this translates to about 1/4 to 1/3 of a teaspoon for the average adult face.
Contrary to the common advice that sunscreen should be reapplied every 2鈥?hours,research has shown that the best protection is achieved by application 15鈥?0 minutes before exposure,followed by one reapplication 15鈥?0 minutes after the sun exposure begins.Further reapplication is only necessary after activities such as swimming,sweating,and rubbing.[2]
However,more recent research at the University of California indicates that sunscreen needs to be reapplied within 2 hours in order to remain effective.Not reapplying could even cause more cell damage than not using sunscreen at all,due to the release of extra free radicals from absorbed chemicals.[3]
Dosing for sunscreen can be calculated using the formula for body surface area and subsequently subtracting the area covered by clothing that provides effective UV protection.The dose used in FDA sunscreen testing is 2 mg/cm².[1] Provided one assumes an "average" adult build of height 5 ft 4 in (163 cm) and weight 150 lb (68 kg) with a 32 in (82 cm) waist,that adult wearing a bathing suit covering the groin area should apply 29 g (approximately 1 oz) evenly to the uncovered body area.Considering only the face,this translates to about 1/4 to 1/3 of a teaspoon for the average adult face.
Contrary to the common advice that sunscreen should be reapplied every 2鈥?hours,research has shown that the best protection is achieved by application 15鈥?0 minutes before exposure,followed by one reapplication 15鈥?0 minutes after the sun exposure begins.Further reapplication is only necessary after activities such as swimming,sweating,and rubbing.[2]
However,more recent research at the University of California indicates that sunscreen needs to be reapplied within 2 hours in order to remain effective.Not reapplying could even cause more cell damage than not using sunscreen at all,due to the release of extra free radicals from absorbed chemicals.[3]
Dosing for sunscreen can be calculated using the formula for body surface area and subsequently subtracting the area covered by clothing that provides effective UV protection.The dose used in FDA sunscreen testing is 2 mg/cm².[1] Provided one assumes an "average" adult build of height 5 ft 4 in (163 cm) and weight 150 lb (68 kg) with a 32 in (82 cm) waist,that adult wearing a bathing suit covering the groin area should apply 29 g (approximately 1 oz) evenly to the uncovered body area.Considering only the face,this translates to about 1/4 to 1/3 of a teaspoon for the average adult face.
Contrary to the common advice that sunscreen should be reapplied every 2鈥?hours,research has shown that the best protection is achieved by application 15鈥?0 minutes before exposure,followed by one reapplication 15鈥?0 minutes after the sun exposure begins.Further reapplication is only necessary after activities such as swimming,sweating,and rubbing.[2]
However,more recent research at the University of California indicates that sunscreen needs to be reapplied within 2 hours in order to remain effective.Not reapplying could even cause more cell damage than not using sunscreen at all,due to the release of extra free radicals from absorbed chemicals.[3]
The principal ingredients in sunscreens are usually aromatic molecules conjugated with carbonyl groups.This general structure allows the molecule to absorb high-energy ultraviolet rays and release the energy as lower-energy rays,thereby preventing the skin-damaging ultraviolet rays from reaching the skin.So,upon exposure to UV light,most of the ingredients (with the notable exception of avobenzone) do not undergo significant chemical change,allowing these ingredients to retain the UV-absorbing potency without significant photo-degradation.[1]
看了 谁有关于介绍防晒霜的英语短文...的网友还看了以下:
有包装皮密封的雪糕,若长时间在冰箱冷冻室里存放.当撕开外包装皮时,会发现雪糕表面有一层霜,请解释雪 2020-05-13 …
物态变化Ⅰ雪糕冒白气是怎么形成的?白气是什么?雪糕拿出来有一层霜是为什么?那层霜是什么呀?雪糕袋上 2020-05-13 …
秋季节,农业生产中为了防止晚熟的庄稼遭受霜冻经常在田地间燃起一堆堆篝火,你认为他们这样做,对防止霜 2020-06-28 …
把下列几种景物融和在一首优美的诗里面:水树蜻蜻荷花要有题目作者霜叶红于二月花一诗的作者和题目 2020-07-05 …
空气中的水蒸汽遇到0℃以下的物体,会直接为白色的小冰晶,这就是霜.如图所示是课外活动小组的同学们利 2020-07-05 …
空气中的水蒸气遇到O℃以下的物体,会直接为白色的小冰晶,这就是霜.如图是课外活动小组的同学们用易拉 2020-07-05 …
描写霜的诗句并有作者、作品名 2020-07-05 …
霜水有作用,如何产生D,化学名是什么,还有霜水与蒸馏水一样吗? 2020-07-05 …
冬天,在一些屋檐上结有一些冰柱;夏天,冰箱的冷冻室里结有一层霜,冰柱和霜的形成原因分别是A.冰柱是水 2020-12-07 …
从冰箱冷冻室里拿出一块冻肉,表面还没有结霜,过一会儿看到其表面有一层霜,这层霜是()A、空气中的水蒸 2020-12-29 …