英语翻译1.标有序号的尺寸为重点检测尺寸;2.无标注公差尺寸按(GB/T1804-2000)制造;3.钣金表面批锋高度≤0.2mm,注塑件≤0.5mm.4.未注倒角为R0.3,不允许有锐角;5.表面不允许有批锋、碰伤、压痕.
1.标有序号的尺寸为重点检测尺寸;
2.无标注公差尺寸按(GB/T1804-2000)制造;
3.钣金表面批锋高度≤0.2mm,注塑件≤0.5mm.
4.未注倒角为R0.3,不允许有锐角;
5.表面不允许有批锋、碰伤、压痕.
It is the important inspecting dimension for the numbered dimensions.
The dimensions which is not marked tolerance should be manufactured according to GB/T 1804-2000;
The sheet metal surface burr hight ≤0.2mm, and for injection molding piece ≤0.5mm;
It shall be R0.3 for unmarked champher, and not allowed to have sharp corner;
It is not allowed to have burr, scratch, and press marks.
求铁钉钢钉价格铁钉(普通牌子)2.5寸 2寸 3寸 1.5寸 的各一箱,多少一箱啊?钢钉(普通牌子 2020-05-13 …
"请上交探究活动照片(5寸或6寸),记录和感想(电子稿)”是什么意思?"请上交探究活动照片(5寸或 2020-05-14 …
请问正常1寸,2寸,5寸,7寸是多大尺寸和分辩率?正常1寸,2寸,5寸,7寸用PS处理成多少,多大 2020-05-16 …
按常用骨度分寸,前两额发角之间为( )A.5寸B.6寸C.7寸D.8寸###S 2020-05-17 …
英语翻译目前,国际上通常使用的干货柜(DRYCONTAINER)有:外尺寸为20x8x8英尺6英寸 2020-06-10 …
一台显示器.长32厘米.宽24厘米.面积一共768平方厘米,那换算成寸是多少寸?英寸呢?还有手机的 2020-06-10 …
英语翻译1.标有序号的尺寸为重点检测尺寸;2.无标注公差尺寸按(GB/T1804-2000)制造; 2020-06-24 …
场地平整后的地面标高-0.5米,基坑底的标高-2.2米,边缘系数m=0.5,已知基础底部尺寸为20 2020-06-24 …
关于电热丝加热的问题我用1.2M长0.5mm的电热丝阻值是4.5欧24V加热可以用来切割泡沫.然后 2020-07-01 …
数码相机ccd的尺寸怎样计算?例如1/2.5英寸是指ccd哪个部位的尺寸,是对角线还是其它?怎样换 2020-07-25 …