英语翻译每班工作前必须检查液压站液压油位是否正常,冷却液是否足够.锯片导轨润滑每天至少加油一次.当锯片产生刀瘤时,必须立即停机清除刀瘤.每天下班前必须清除集屑槽内切屑,并将工

Question

英语翻译
每班工作前必须检查液压站液压油位是否正常,冷却液是否足够.
锯片导轨润滑每天至少加油一次.
当锯片产生刀瘤时,必须立即停机清除刀瘤.
每天下班前必须清除集屑槽内切屑,并将工作台面清洁干净.
每周检查一次整台机器所有的螺栓紧固件.
常见故障及排除

Answer 1

before each shift,hydraulic unit should be checked whether the level of the hydraulic fluid is normal,cooling liquid is sufficient.
Guid rail of the saw should be lubricated at least once a day.
When the saw generate built-up-edges,the machine must be turned off and eliminate these built-up-edges.
Before shift-off,residuals in the slot must be cleaned up,so as the working bench.
Bolts and fastening devices of the whole machine should be examined each week,to eliminate the common failures.
译文如上,希望有所帮助 ：）